Braze-A-Gas is best-practice solution for brazing copper tubes
Braze-A-Gas has been developed specifically for brazing copper tubes, as well as for welding and cutting. “Here we have ensured that the cylinders are easy to handle, with our standard cylinder valves allowing the use of standard regulators,” A-Gas South Africa National Sales Manager Michael Labacher highlights.
Braze-A-Gas consists of oxygen and acetylene that, when combined, are the engineer’s best choice for brazing copper tubes together in refrigeration and air-conditioning systems. These products produce a flame temperature of about 3 500°C, which is significantly hotter than propane, propylene, or MAPP gas.
“An oxygen-acetylene flame gives good localised heating, with a minimum of waste heat,” Labacher notes. Cylinders are available in a convenient five litres cylinder, providing a portable and economical solution for an array of applications and specific requirements.
Brazing and debrazing (unsweating) best practice are essential for compressor replacement in air-conditioning system service. Any brazing or debrazing must only be carried out after recovery of any excess gas in the system.
This follows the introduction of an inert gas such as Oxygen Free Nitrogen (OFN) into the pipework. It is critical to expel oxygen from the internal system so as to prevent flash-ignition of hot oil, a particular problem when debrazing welded connections on replacement compressors. OFN, in particular, inhibits oxidisation of internal copper pipes and fittings when brazing.
“This is why A-Gas South Africa promotes best practice in this regard, which entails making engineers and technicians aware of the potential for fire during brazing operations,” Labacher adds. Gloves and goggles should be worn as standard Personal Protective Equipment (PPE), while an adequate risk assessment also needs to be carried out. A dry-powder fire extinguisher must be on hand at all times during hot works.
“Technicians are often unaware of products on the market that can assist them in the field, such as our Braze-A-Gas. For example, A-Gas South Africa not only offers a wide range, but can supply recovery cylinders to capture unwanted gas for recovery or destruction, as well as handy portable-sized OFN cylinders for purging and pressure testing,” Labacher concludes.
Connect with A-Gas on Social Media to receive the company’s latest news
LinkedIn: https://www.linkedin.com/company/10972305/
Ends
Notes to the editor
To download hi-res images for this release, please visit http://media.ngage.co.za and click the A-Gas link to view the company’s press office.
About A-Gas
A-Gas is a leader in the supply and lifecycle management of speciality chemicals. This includes: refrigerants, blowing agents, industrial gases, halon and fire protection agents used in industries operating in the HVAC, refrigeration, insulation, solvent, manufacturing and medical sectors. Delivering innovative and sustainable solutions for environmentally-sensitive gases and chemicals for more than 20 years, A-Gas offers a tailored ‘one-stop shop’ solution of products and services, helping its clients meet their regulatory obligations responsibly and sustainably.
A-Gas South Africa Contact
Michael Labacher
Sales Manager
Phone: (011) 392 4791
Fax: (011) 392 2296
Cell: 082 926 7911
Email: michael [dot] labacher [at] agas [dot] com
Web: www.agas.com
Media Contact
Nomvelo Buthelezi
NGAGE Public Relations
Phone: (011) 867 7763
Fax: (086) 512 3352
Cell: 083 4088 911
Email: nomvelo [at] ngage [dot] co [dot] za
Web: www.ngage.co.za
Browse the NGAGE Media Zone for more client press releases and photographs at http:/media.ngage.co.za